With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required. California Residents WARNING
This Part Fits:
Year | Make | Model | Submodel |
---|
2000-2006 | Audi | TT | Base |
2006-2007 | Volkswagen | Beetle | 2.5 |
1998,2009-2010 | Volkswagen | Beetle | Base |
1999-2005 | Volkswagen | Beetle | GL |
1999-2005 | Volkswagen | Beetle | GLS |
2005 | Volkswagen | Beetle | GLS TDI |
1999-2004 | Volkswagen | Beetle | GLX |
2008 | Volkswagen | Beetle | S |
2008 | Volkswagen | Beetle | SE |
2001-2002 | Volkswagen | Beetle | Sport |
1998,2006 | Volkswagen | Beetle | TDI |
2002-2004 | Volkswagen | Beetle | Turbo S |
1999-2006 | Volkswagen | Golf | GL |
2004 | Volkswagen | Golf | GL TDI |
1999-2006 | Volkswagen | Golf | GLS |
2004,2006 | Volkswagen | Golf | GLS TDI |
1999 | Volkswagen | Golf | GTI |
2002-2006 | Volkswagen | Golf | GTI 1.8T |
2003 | Volkswagen | Golf | GTI 20th Anniversary |
2002 | Volkswagen | Golf | GTI 337 |
2000-2001 | Volkswagen | Golf | GTI GLS |
2000-2001 | Volkswagen | Golf | GTI GLX |
2002-2005 | Volkswagen | Golf | GTI VR6 |
1999,2005 | Volkswagen | Golf | TDI |
1999 | Volkswagen | Golf | Wolfsburg Edition |
2006 | Volkswagen | GTI | Base |
2005 | Volkswagen | Jetta | 2.5 |
1999-2005 | Volkswagen | Jetta | GL |
2005 | Volkswagen | Jetta | GL TDI |
2002-2005 | Volkswagen | Jetta | GLI |
1999-2005 | Volkswagen | Jetta | GLS |
2005 | Volkswagen | Jetta | GLS TDI |
1999-2003 | Volkswagen | Jetta | GLX |
1999-2005 | Volkswagen | Jetta | TDI |
1999,2001,2003 | Volkswagen | Jetta | Wolfsburg Edition |